Well there is good news , the 15x10" centeline telstars w/28x10.5 MT ET Drags did not rub , no mods to the frame or the fender lip . I do run and need a air bag on the pass side . The car is not centered on the frame and the Slick is about 3/8 closer to the fender lip on the pass side than the dr side , no problems w/frame at all .
Bad news is due to a failed T/C I was not able to launch very hard at the track ,1.6 60 ft was the best but no rubbing there ,as soon as the T/c and tranny come back I will see what happens on a 1.4 60ft launch .
Here is a link to a pass at the track ,chk out the rear slicks ...http://www.jagracingphotography.com/00000011.jpg
Mark
Bad news is due to a failed T/C I was not able to launch very hard at the track ,1.6 60 ft was the best but no rubbing there ,as soon as the T/c and tranny come back I will see what happens on a 1.4 60ft launch .
Here is a link to a pass at the track ,chk out the rear slicks ...http://www.jagracingphotography.com/00000011.jpg
Mark