Search results

1984 gn. What are these 2 connectors for, there just hanging around behind the glovebox?

I put 1999 GMC envoy 2 piston calipers and 1982 S10 manual brake rear wheel cylinders and because of the bigger pistons in the calipers and wheel cylinders the brake pedal is lower than usual. Which master cylinder will work with this combo, I have the monte carlo master when I changed from...

need to find the leather to recover the steering wheel.

looking for 2 engine light sockets. they are bigger than the rest of the sockets. shipping to 60056 thanks

what i have now tps .45 idle 1000 rpm park 800 in drive with foot on the brake idle control counts 0 idle 18 in drive foot on brake coolant gets to 175 degrees o2 it 2000 rpm 1.00 idle .97 and stays steady and goes up and down if gun the engine bl and int is at 128 dont go into closed loop what...

what is the thread size that goes into the engine block, for the oil pressure turbo brass block?

about 4 months ago i put my gn on the dyno and the turbo let go and oil was going into the downpipe and smoking alot. i have 75 cold and 20 hot idle presure and a booster plate. a old timer told me about putting a .060 restrictor in the oil line going to the turbo, like a carb jet seeing i have...

looking for a new brass oil block for turbo and oil pressure sender? shipping is 60056 and i have paypal.

i have these now from the local larts store and thry are starting to rust. what is the replacements that look better?

what color if any would be under the car if there was no undercoating?

i am replacing the rear 2 cables and i need a diagram on how they run my car never had them before.

ill be there with my 84 gn

i am trying to remove the shaft so i can replace the seal. the dowl pin broke so i drilled the pin. with the drill bit in the hole i can feel that i drilled the pin out but the shaft wont come out. i know the case is aluminum and i dont want to force the shaft out cuz i am sure ill brake the...

Throttle,cruse control,transmission throttle valve. for an 87 engine. zip code is 60056 Thanks Andy

i need to replace my mirror glass how does it remove and install?

i am on my 3rd set of windshield trim. i am driving and all of a sudden a thud and the trim blows off the car and the car behind me runs over the trim. why does this come off when it is on, it don't move and is tight to the glass and body?

i did a boost leak test and i have air coming out of the throttlebody shaft seals. i called accufab and they say it is normal because air has to go somewhere. my engine wont idle under 1100 rpm and this is where i saw the first boost leak, and i am sure it is a vacuum leak too (havent tested for...

how does it mount? pics would be appreciated. thanks andy

i found boost/vacuum leaks on the throttle shaft seals where can i get new ones? andy

now that russ is not making the door and spid label, where can i find these my car was repainted before i got it and the shop painted over all the labels. i was going to buy them from russ but he went out of business. ive been looking around from classic car restoration places but i need the...