Search results

Sir, I have been informed to install between .006 - .007 endplay. Watch the gasket as it will compress. Mine moved about .004 after it torqued down during setup and I chased my Butt for awhile until the Board member came to my rescue. Bob

Roger that Mike. Thanks, Bob

Well it has started. The gents I bought the motor from said that it had a flat tappet cam in it. The cam or lifters did not come with the motor and I am thinking that it had a special cam/nose on the cam because I was mocking it up tonight and it appears to be offset about .100 to .120. I...

Mike, I believe Buick used the 016 casting to produce this block as it appears that the pickup was cast into it and it has the regular oil ports in the front of the block. The next thing that I have to figure out is the pulley alignment/front bracket. Bob

Pics of motor I am working on. It is an early 153 on-center with internal oiling. Still learning a lot about it. Bob

Mike, I just read thru this forum and I say Wow didn't know there were that many different combination of blocks out there. Thanks, Bob

Thanks and I bet that would be a hoot to try. Bob

That is a cool looking project. Not sure what an LSR project is but it is interesting. Bob

Rollie, Do you have all the hardware and an intake for those heads? Not really sure if I have ever seen a set of 15 degree stuff and I would bet that they would require a set of custom headers. Could you post some pictures? Really interested in the exhaust ports. Bob

Norbs, A stock one that is welded up will fit them and I haven't tried the Edlebrock (carb unit) but have heard they will bolt on. The best one to get is the Brodix BD 90 V6 I think that is the number but I would have to go out to shop and verify that number. There are not a lot of intake...

1991 GMC Syclone with a big inch Bowtie motor in it.

Gent's, The hunt is back on. Heads weren't what I was looking for. Let me know if you have any for sale. Thanks, Bob

Sir, Nice find. I have been looking for one of those setups for YEARS!!!!!!!!! Sorry not much help on the camshaft selection. Good luck with your project. Bob

Guy's, I believe that I found a set. Thanks, Bob

Gents, Working on a real one is totally involved. Every time I walk into the shop to work on mine I just walk over and cut my hand to get that out of the way. LoL Bob

Chuck, I called him/Scott and he sold all of his parts. Thanks, Bob

Not sure if this is the place to provide an update or should a person start a new post on what we have changed for this year. Also what we had done up to this point. Maybe a staff member/Chuck can way in on this? Bob

Chuck, I will try and give them a call. Thanks for the heads up. Bob

Just did and it looks like those guys are having/know how to have a bunch of fun. Me not so much but hopefully this year we will get a handle on it. Bob

Yep, That is why I almost changed the name of my truck to Jack Stand because it Always seems to be in that position. Bob