Search results

I am looking to get a 2 stage transmission jack to use with my lift. I am looking for something around $500 middle of the line. For those who use them often, what do you have and is it holding up? Thanks

What bore taper is within spec on these blocks? The machine shop just checked my bore and all cylinders have a taper between 0.002 and 0.003. Its got a forged steel crank with 3 billet caps. I need to get my rods and pistons. I don't want to bore it if it doesn't need it. So what is within spec...

I have a question about HRs LCA's. On the HR website it says they are recommended for high horsepower cars with limited street use. I know the longer arms will affect the pinion angle, but it can be adjusted back with adjustable uppers. So why not use for a street car application to help...

One of my original escutheons just broke and am looking for another set and came across the aluminum gbody ones. Has anybody used a set? How do they fit? Do they look as good as they do on the web? Thanks for the feedback...

I just pulled the weatherstripping off to replace it. I found some rust under were the weatherstripping goes. I am trying to keep from pulling the doors and blasting the inside and repairing. None of these spots have gone through. I will be painting the car in a few years, so the doors will be...

I have a extra motor in the shop, so I'm getting ready to build a shortblock. Been reading up on the stroke vs. bore argument. It seems that there isn't much gained by going with a stroker build. However, since I'm buying a forged rotating assembly, It would only cost a few hundred bucks more in...

When my car was basically stock I put some of erics 60lb injectors and one of his 6.1 wideband chips in. I just got my car back together and have upgraded to a te44, precision slic, alky, shorty intake, etc. The question is: can I tune the fueling and timing for these mods or just go ahead and...

I just bought a wrecked 87 GN local and am looking for some insight on the value. It was hit hard in the front which bent the frame and creased the body. I have already pulled the front clip and drivetrain. I am probably going to keep the rest just to hold onto. The compressor, power steering...

Im looking for a nice chrome turbo cover. PM me with price and pictures. Thanks

In excellent condition with hardware, shroud, boots, pipes, etc. PM with price and pictures. Thanks

Looking for a positve and negative battery cable for my WE4. Must be in excellent shape. Stock or caspers. PM me with price and a pic. Thanks

I am looking for a known good and in good shape oem alternator for my WE4. PM me with pics and price. Thanks

I'm looking for a nice chrome 3" Maf pipe with boots and clamps all in excellent shape. Pm with price and picture. Thanks

Either in good shape. PM price and pictures. Thanks

Is there a rebuild kit for the 84/85 hydroboost boosters? I have looked and can't find one...Thanks

I am looking for a known good brake booster. Not a rebuilt cardone unit. PM with price and a pic if you got it. Thanks

I did the hydroboost conversion several months ago. However, my rebuilt cardone booster (52-7211) failed. I took it back to advance to get another one ordered under warranty. Their computer told them there was none available. So they called cardone and told me that the factory doesn't have any...

I am in the process of replacing all my weatherstripping. I removed my door weatherstripping and found a rust spot where I guess the old weatherstripping held moisture. This is the only rust on the car, so I want it to be fixed right. I can get to all the back of it. Should i clean it up with a...

I am getting ready to replace the outer dew sweeps, lower door strips, and roof rail strips on my WE4. I did some reading on Gbody's site and they are saying their reproductions are as good as or better then GM. I also did a search and everyone seemed to think they are quality repro's. However...

I'm looking for driver quality "T" emblems. PM price and pictures. Thanks