Search results

thanks i will stick with the 10/30

thanks thats what i've been running but i have seen some posts of people running 20/50. I didn't know if i could run thicker oil?

what oil weight should i be running on a stock set up? thanks

thanks for the injector / chip combo truck runs great

My truck is to far gone to fix plus its got the convertible top which leaks so I picked up an 86 s-10 and i am going to swap everything to that. Any suggestions while i have motor out just looking to do small stuff have a budget of $1000-1500. The motor is stock besides...

I went out a couple hours ago and I think i got it I just had to pull the tps to the front of the truck then adjust I got .42 idle 4.30 wot. Then i printed out a thread to reset iac so I think i will do this tomorrow then set the tps again. Another problem was the ajduster for tv cable was all...

thanks for the help

I had a 99 zr2 with a similar problem starving for gas, breaking up , sputtering no codes I replaced the spider. I am not sure if that year 1500 has a spider or rail?

tv cable The cables are stock I think? I will check the length. The problem i am having is i set the tps .42 but wide open i am only getting 4.0. I have been reading threads and i might have figured it out. When i was adjusting the tps i am not pulling it straigh forward first. I havent had a...

I have an 84 s10 with gn drivetrain. I just put new injectors+chip in today the problem im having is i set the tps to .42/.44 which is good but the wide open im only getting mid 3's on scanmaster. I noticed the tv cable is set all the way back to firewall which its stoping me from getting full...

sunderstown/north kingstown

thanks for the help

i am changing injectors to 60lbs with new chip from turbo tweak. do i need to remove the clips that hold ijectors to rail or will it come out in one piece injectors and rail? also i removed throttle body to clean and under iac there is a fitting with nothing connected to it any idea what this...

posted pics of turbo today. I think its stock? Thanks for any help.

yea it looks like the 86-87 stock I will try to post a pic tomorrow. some guy wanted to check out my truck today and looked at the turbo and said they didn't have garrett turbos stock. He claimed he used to own a bunch of gn's and **** . bull****er. Im new to this and I am planning on ordering...

trying to figure out if i have a stock turbo or not. My camera's broke ill try to post a pic from phone. The turbo says garett is that what 87 GN came with stock? thanks

I bought a intercooler,fan,turbo heat shield, and some emblems from him. The parts were in all good working order and reasonably priced. Thanks If you ever need any parts contact him he's sure to have it.

I have tons of parts from early 90's trucks i think i can put a sending unit from a FI truck in my tank. Did you order the pump for a buick or s-10? How about a hot wire kit?

I have a 1984 s10 with a 3.8 gn engine. I want to do a walbro fuel pump and hot wire kit and was wondering if i can get a sending unit for a fuel injected s-10 buy a pump and a hotwire kit for cyclone. Does anyone think this will be ok are the pumps similar buick/cyclone and i have an...

Thanks for the info. The clip on the plug is broke i dont think its getting good connection.