Search results

What is the easiest way to put the wire back into this location (see picture)? This is the wire used for the rear running lights, I tried just pushing it back in but it will not stay and do not want to drive the car at night. BTW I hate electrical :confused: Any help would be greatly appricated!

As the title says I am looking for an intercooler fan and a power seat switch. Please include shipping in your price. Zip is 33624 Posted from the TurboBuick.Com mobile app

It has been about 1.5 yrs since I have driven the GN. Basically when I turn the knob to 8 and hit the test button the red led light stays on and no green light comes on (the pump is running). I unplugged the weather pack by the pump and then hit the test button and the green led light comes on...

I noticed a few days ago that the running lights were out and the dash lights were out as well. The fuse was blown. I replaced it and they worked for a bit. Now I have dash lights but no rear running lights. I checked the brown wire under the door sill and it is not getting voltage there, I...

My car just started doing this. You can hear it in the car and is very annoying.

I am about to replace my valve springs and was wondering if anyone had this tool. I could buy it or borrow it for a bit. Thanks

Looking for a good used translator along with a ls1/lt1 maf sensor.

I have had alky for awhile, running ~23# of boost. Recently, the ground and pump became loose causing the alky to not function properly. I thought I fixed the problem so I set the boost to 20#. I took it out and everything seemed to be fine part throttle and 3/4 throttle. So decide to go WOT...

I am looking for a good condition, working headlight switch. I think mine is busted.

Iam looking for a used set of front upper and lower a-arms. The bushings and ball joints do not have to be good.

I am installing new shocks and springs up front. I already removed the tie rod and the sway bar from the spindle. I loosened up the castle nut on the lower control arm and pounded the crap out of it for about 1hr and it doesnt want to release from the ball joint. I jacked up the lower control...

I have 4 front gta's and just ordered some tires for them. I was wondering what type of lug nuts do I need to get? Or can I just use my stock lug nuts? I dont want to damage the rims.

I was wondering if anyone will be heading up there Saturday, if it does not rain? It's my first time going up there and I was wondering what time to get there?

I think my rjc boost controller is not hooked up correctly. I want to get rid of the Wastegate Control Solenoid all together but think I have the hoses hooked up wrong. Here is a sketch of the T-fitting and how what I have it hooked up to.

Iam planning on buying an fbody radiator, do I need the dual fans? I do not have a FMIC, will the stock fan cool it just fine? If and when I get a FMIC then I would buy the duals.

I got a stock turbo it was leaking oil and has play both up and down and in and out. Probably good for a core or rebuild. -Make Offer- Stock actuator. car had 60K when replaced with a HD actuator, worked fine before I took it off. -$15 + shipping- Casper's Hi/Low fan switch never used...

Has about 500 miles on it. It was on my stock turbo. $75 Shipped

I am looking for a good TA-49 turbo but if you have some other turbo similar to it I will consider it. Show me what you got!

My stock turbo is done. I am wondering what turbo would be good for high-mid 11's. My engine is all stock. I have stock injectors, so I need to know what size injectors I need as well. The car is mostly street driven,I do not go to the track a whole lot. I have most of my mods in my sig. I was...

anyone planning on going? Will be my first meet up there. I want to make sure there are some people there.