Search results

The car has been sitting(I have a company car) for the last year basically. About every other weekend I'll drive it to the movies but that's the extent of it. The car has 63,4xx miles. Paint is a 8.5 out of 10 and the interier is a 9 out of 10. If there are any questions ask here or you can PM...

Guys, I installed another set of pushrods and on the driver side they all have a little resistance but still spin with my fingers. On the passenger side there are a couple that spin very freely and a couple that are pretty tight. If I start the car and the lifters pump up will this take up the...

Guys, I installed a roller cam a while back and the car ran like crap and popped under load. I pulled the pushrods out and they were 8.050. I called the person I got the cam from and they said I should have 8.200's in there. I bought the 8.200's and installed them about 30 minutes ago and...

Anyone have any leads on a regal with a hard top that's in decent shape. All I need is the roof but will buy the whole car if the price is right. Doesn't need to be a turbo car. I'm in NE Texas. Thanks

Guys, I just installed my 212/206 weber cam and now I have popping and a miss if I stab the throttle. I read about advancing the cam sensor a few degrees and wondered if anyone else had success with this method. To advance would I turn clockwise or counter clockwise? Thanks a ton for the...

Guys once you pull off the front cover there is a circle plate shaped as a dome, does that get reinstalled when useing a roller cam? Motors apart, just need a little help. Thanks

Guys, is there a need to use non synthetic oil when breaking in a roller cam? Also, do I have to pull the radiator and FMIC when installing the cam? Thanks

Guys, I bought a roller cam from Weber and I have a quick question. My cam button is a Comp Cams and comes with 1 thick (looks like 3/8th thick at most) spacer and than the normal thin shims. Does the thick spacer go on no matter what and then the thin shims make up the difference? Thanks

Guys, I'm next door to Tyler and I'm wondering if anyone knows of a good tranny shop for the 2004r. I'd like to use a vendor but the last time I did I spent $250+ on shipping alone. Thanks for any help. Jerrad

Guys, I just install the stageright trans brake and now when I drive the car I get a pretty loud whine coming from down below. It only does it while it's in gear and driving. Any ideas?

Anyone have any tips? I installed my old one and ended up not being able to put the pan on. Is there a magic trick or am I slow? Thanks

I installed a stageright TB last night and I'm having an issue. Before I put the pan on I tried going through the gears to make sure it would and guess what? It won't go into first. If I use my hand from under the car it will but the shifter won't do it. Anyone have any guesses?:confused:

I was wondering if anyone had a write up to install a roller cam. I looked on gnttype and they have the install procedure for a flat tappet but no roller. Is there any extra steps to do while putting in the roller? Thanks

I'm going to be installing a cam in my near future and was wondering where everyone is getting the gasket sets and what brand will do the trick. I'm assuming I'll need the intake gaskets and the front cover. Am I missing any? Thanks

Like it says, looking for a ratchet style shifter. Can pay today. Thanks

Guys, Does anyone make a ratchet shifter that retains the nuetral switch, etc with out having to weld/rewire items? Or if anyone has one they want to get rid of I'm willing to buy today. Thanks

Guys, I went to the track today and the best time of my day was: 60ft: 1.76 330: 4.98 1/8: 7.74 1/8 mph: 88.51 1000: 10.14 1k mph: 101.3 1/4: 12.20 1/4 mph: 109.8 This was at 20 pounds with the TT...

I'm wondering if anyone can post the instructions on how to adjust the fuel/timing in his chips. My computer doesn't have adobe reader so I cant view it on his site. Thanks

Hey guys, I'm about to put some adjustable upper control arms and metco lca's on the car and I was wondering what the optimum pinion angle is for drag racing. I want to drive the car on the street too so I don't want an angle that is so negative that it causes drivability/durability issues...

Is G body parts and Kirbans the only place to buy these? I'm needing one and they seem to be the only options. Thanks