Search results

I'm going to attempt to replace the crank sensor on my 87 GN. All indications point to it being bad. Can someone give me step by step instructions on how to do this? Do I need to change the bracket too? Thanks, Jeff

My 87 GN has been running great for several years without any issues. This morning I took it for a short errand. I was cruising along, no WOT runs or anything. Suddenly the car just stalled. The GN was running smooth as silk, then it just died. All the connections seemed tight. I also...

I have an 87 GN for sale. The car has a little over 58,000 miles. It has many modifications as listed in the sig. There is also a link to pictures of the car from 1996 to present. The pics with the new paint, embroidered mats, champ valve covers, chrome turbo cover, etc. are of the car in it's...

I've got a possible job opportunity coming up in Dallas. The job is located in Addison. I'm looking at townhomes in Carrollton, Plano, etc. Any other areas I should check out ? Another question I have is regarding emissions testing. Are there any areas around Dallas that don't test ? I'm...

I'm running a scanmaster 2.1, LS1 MAF sensor/translator and Extender chip. I realize with translator switch 3 off, this does not eliminate the MAF readings to the ECM to 255. I also realize that the scanmaster shows half of what the actual AF really is. My question is this. Does the...

About how many pounds of R-12 does the A/C hold ?

What are some good products to clean up Weld draglites? They have started to get a bit hazy.

I've been running Nitto drag radials for years. I know BFG had them out before the Nittos. I am now noticing a bunch of different companies such as MT, M&H, Hoosier, etc. are producing drag radials. I run my DRs all the time, street and strip. I like the Nitto's because of the relatively long...

I'm about to install a set of ported iron heads from Nick M. I'm also considering getting the matched ported lower intake. As part of my upgrades, I'm going to install a power plate for my stock intake plenum. Just wanted to make sure the power plate for a stock upper intake would still...

Does anyone know the seat pressures of the springs Nick is using in the Hi-Flow stock iron replacement heads ArizonaGN sells ?

I'm about to add several upgrades and haven't fully decided on a cam. I don't really want to step up to a roller cam right now, so I've pretty much narrowed it down to 2 different hydraulic comp cams with lifters. Either a 206/206, or a 212/212. Here are the other upgrades, which will all...

I'm about to install several significant upgrades. I'm trying to decide if I should run a CR42TS or CR43TS. I'm currently running a 43. Here are the upcoming mods: Hi Flow ported heads from Nick Micale T&D 1.6 roller rockers (and taller valve covers) 206/206 hydraulic comp cam w/ lifters...

I need some taller valve covers to accomodate 1.6 roller rockers. What vendors might carry these ? I'd like some with a nice logo such as Buick Motorsports, power 6, Grand National, etc.

I'm doing some pricing on a set of 1.6 roller rockers. The T & D's are top notch, but they also command top dollar. Anyone know of other good quality rockers for a reasonable price ? (for 8 bolt heads)

Anyone tried or have opinions of the 60lb injectors that Mike Licht is selling thru full throttle speed ? I believe they work with the stock ECM. I'm also running a translator/LS1 MAF. I'm also having a new chip burned soon, so I thought this would be a good time to ditch the 868's. I will...

Anyone using anything other that Klotz lube with denatured in their SMC kits. I recently moved and misplaced my bottle of Klotz. I've heard some use Marvel Mystery oil. Will that work ? Any other ideas ? *** And yes, John, I know you haven't used lube in your kit for years and it still...

I'm running an SMC single nozzle alky kit and an LS1 MAF/translator. I've been running an extender chip set at 19*/17* timing with wastegate % at 85/80. Basically a 93 octane chip. With this setup, I've been able to run 21 psi with 0 KR. I just had a new extender chip burned with 23*/21*...

My 87 GN has been running pretty good for quite a while now. The last major mod was an SMC alky kit back in March. Made several visits to the track and all was pretty good. In May I noticed the tranny starting to slip badly on the 1-2. In June, Greg Friend checked it out and suspected a...

I've had trouble with my spray on light coming on when the pump kicks. It wouldn't come on under boost or pressing the test button. I talked to steve about this some time ago and we determined the kit was operating fine, but I needed to adjust the screw on the bottom of the hobbs switch...

I just picked up my GN from having the tranny rebuilt. Greg Friend and I are buds from way back. He's always given me a hand with my GN whenever I've had problems or an install that I needed help on. A few months ago, my tranny started slipping on the 1-2. Greg checked it out and determined the...