Search results

  1. R

    10/10 TURBO Crank Fresh From The Machine Shop

    You said this is a stock tb crank?
  3. R

    F.A.S.T, Fuel M

    How much would a harness run and wouldi need anything else?
  4. R

    6 cam sensors 2 stock MAF sensors

    Pm sent.
  5. R

    Wtb hydraulic roller cam

    Thanks let me know when you find out the details.
  6. R

    6 cam sensors 2 stock MAF sensors

    PM ME SO I CAN GET PMT INFO I WILL TAKE ONE.:biggrin:
  7. R

    6 cam sensors 2 stock MAF sensors

    Is this the complete sensor or just cap?
  8. R

    Wtb hydraulic roller cam

    Something to go with my stock ported heads 70qtrim and 3300 stahl. Needs to pull to about 6k rpm. Thanks:)
  9. R

    REV X3 Buick turbo 218/222 cam - NEW

    Is cam hyd roller?
  10. R

    New billet front and rear main caps

    Would i need a main girdle if i used thes caps? and other than line hone would there be any additional machining necessary on my stock gn block?
  11. R

    Stage 2 OC Block, SB Crank, Carrillo rods, Champion Heads & Intake CNCed, V1, ATR hds

    Do you still have the crank? what kind of run time is on it?
  12. R

    J & E .030 pistons/new wiseco .927 pins

    JE Still Available?
  13. R

    Harland Sharp 1.55 roller rockers + RJC

    Is any of the parts still available?
  14. R

    Let the snapping begin!

    I just have the stock susp. so i hope the pinion angle has not changed. if it has something must have bent. upper and lower control arms are boxed. with p/u bushings.
  15. R

    Let the snapping begin!

    In the past 3 days i have broken 2 drive shafts the first broke at the rear at launch. snapped ujoint ear off it. the second at about 900 ft out snapped in 2 pretty equal pieces. these were both stock shafts is it just the 23year old part is being killed by the 70q at 25lbs of boost? or could...
  16. R

    Thanks lonnie at extreme automatics

    You Are The Man! Industry leading Product and Customer Service!
  17. R

    GNX fender vents

    Put me in line for vents.
  18. R

    Best torque converter prices??

    I have a precision and this is the second one and I have been nothing but 100% SATISFIED! was not the cheapest but Vicky was extremely customer service oriented and the great warranty and free restall (though i have not used it yet) is a definte bonus for me. i went with the multi disc lock up...
  19. R

    Car acts like it is out of time ocassionaly

    My 87gn runs great starts up every time in the driveway when cold but sometimes after it had been started a few times it will crank like it is way out of time and backfire so hard a few times I thought for sure it had to blow the mufflers off.after it sits for a while probably45 mins or So it...
  20. R

    parts parts 4340

    Where are you in indy? how many miles /passes on set up?
  21. R

    No oil in oil filter

    I had this problem and it turned out that the adapter that the oil filter and cooler lines go into has a small spring and valve on one side and that was not closing all the way. might want to check it. only takes a couple mins.:p
Top