Search results

i broke my cam sensor, my short block is put together, is there any way of doing it??? can i just pull the old one out and put the new one in the same exact way and facing the same way?? thanks

my motor fell over and it broke the whole round part of the cam sensor.. where do i get one?? and how do i install it?? is there a performance or"BETTER" one i can buy....anything i need ti know during install ????? thanks everybody

im running an inline pump and an inline regulator, so i really cant use the stock regulator of rails cause when i take the stock reg off, there is a big hole... anybody know where i can get a custom rail made or where i can buy one that has just a -10 fitting at the end of the rail?? any help...

do all GN come with one stock? i have 2 holes on the pass side of my trans is this what these are for???

i have a ta62 turbo with a bunch of other stuff. it calls for 55# injectors and a 3200 stall. if i run 72# injectors and a 3500 stall now until i get a bigger turbo, will it hurt anything?? i also want to run braided -10 fuel lines...or is all this too big for this turbo.. i also dont want...

how do you tell the difference??? what does it do?? and which is my 85 tranny?? thanks

i took off my flywheel and when i went to put it back on the bolts dont line up.. i tried every bolt in every hole?? why is this???? i know its a dumb ? but i can t get it.. any tricks??? thanks

where can i get my exhaust housing for my TA62?? it is 4 bolt, and im going to run an external wastegate(dont know if that matters) it says A/R .60 M24 on the side of the turbo... any info please thanks shawn

what is the GN bolt pattern?? is it 5x4.75??? will rims and tires off of a 96 camaro fit the GN????? thanks

ok, i put a 87 motor/ 85 trans in my 96 camaro.. i ripped the harness out of it already.. the camaro engine harness and body harness (lights, under the dash...) is all one harness.. im a little confused on the whole wiring thing.. am i going to have to get a custom one made...(if so where) or...

they are both the same right??? what about the connector on the side of it..is that the same for both tranny's.. i have an 85 trans but the wiring harness im getting built is for an 87... im a little confused..

ok, i am building my motor to look into hi 10's low 11's i have 218/218 cam and was wondering about roller rockers... which should i get? where do i get them?? what else am i going to have to buy to have them?? pushrods? lifters? valve covers?? im still new to the GN world but learning...so as...

I AM BUILDING MY TRANS NOW AND I WAS WONDERING ABOUT THE "SERVO" WHAT DOES IT DO?? WOULD IT HELP IF I REPLACED IT? SHOULD I BUY A BETTER ONE, A CORVETTE SERVO,?? OR SHOULD I JUST BUY A NEW ONE TO HAVE IT NEW.. ANY HELP WILL BE GRATEFUL.... THANKS SHAWN

i put a 87 GN motor in a 96 camaro, im building the hell out of it...but i dont want to put a 2004r trans in it.. what would i have to do exactly to get the turbo 400 in?? i want a push button trans brake with it, and i cant find anybody that sells the push button for the 200 4r... what about...

can/or should i run stock valve springs with the 218/218 cam? if not what should i run and is there a part number or something?? thanks

i need to buy all new bolts that go from the trans to the block, i lost mine.. i know i can get them from a dealer right? anywhere else??? thanks shawn

what do i have to do to run the LT1 MAF? do i need to change anything major and will it help, because im also going to get the translator plus.. when i buy the maf, what else am i going to have to get??? thanks

i bought the TA62 turbo and i was wondering if i can put it in with the stock converter? and no trans work at all??? i was wondering cause im trying to get my project done this summer... thanks

i want to run a trans brake on my 200r4.. do they make one?? where can i get it, and is it hard to install.. is it better for gn's? thanks for any help you can give

i live in va bch and im a little lost witht he 87 year motor that im building.. anybody live in the hampton newport news va bch norfolk and so on area..... give me an email or im so i can get some info from you so we can meet... =) thanks