Search results

The 10 amp fuse that protects or controls the a/c compressor clutch keeps blowing. Sometimes it will work for 2 miles and sometimes 5 miles. The 2 prong connector that goes to the clutch coil with the resistor was slightly melted,so I replaced and it continues to blow. Could the clutch coil be...

Can someone provide a Delco pn or a specific model car for a Delco MAF sensor ( 3") to use with a Translator + ? Thanks in advance

Have an ATR GNX dual polished 2.5 with their mufflers. I don't like the drone or the buzzy sound under boost. What are good stainless replacements, with good tone, don't have to be real quiet.

BLMs are from 90 - 120 under cruise and 114 or so at idle. I have changed O2 sensor, checked fuel return line,changed spark plugs and wires and fuel press regulator. Even changed injectors from 50's to 009. Other things have been mentioned( exhaust leak) how bad would exh leak have to be? I...

I have the Direcr Scan box with the cable but am missing the disk. Is that something that can be download? And will it work on a laptop with Windows ME edition?

Does anyone know where to find the complete vacuum hose diagragm? Especially any that are engine related?

I have been trying to figure this out. BL after warm-up has been average of 117, but is getting lower at cruise,110-99. I have now changed O2 sensor twice, even changed injectors from 50's to 009's and it seems to be worse. When rolling along in 3rd,accelerate and boost comes up and pop,but...

In the fuse block near the upper right hand corner is a fuse listed as ECM/SOL. What is the SOL(solenoid?) Which one. What would cause it to blow? SHort where or what?

What's the latest and most popular good performing injector for a combo close to what I have. TE-60, ported iron heads, front mount, Walbaro, Alky Inj, 62mm Trottle body, Vigilante Converter, BGC Intake, 210/210 cam? Seems to always be some downsides. CAr is not a track car, show...

Even when turned off, is the active light supposed to come on? And if so, should it be on close to the setting which wouldn't be on the vacuum side

Can't seem to get the block learn #'s up. Now at 110-117 under driving conditions and engine shuts off at approx 3200, 12# boost. Whats going on here?

Under boost around 12# engine just shuts down. Shift to neutral, no start, park, no start. Seems like I have to turn off ignition and on again to restart. Something stupid and simple I am sure. Suggestions please. Thanks

Looking to buy a 50# injector chip this weekend in South Florida,will drive to pickup, Thanks Brian

This will probably be something extremely stupid or easy. Changed out injectors from 009 to Blue Tops. Also changed coil pack with new at same time due to high resistance on old one. Reaasembled all, tried to start car to get out of garage to be able to open door to change chip. Cranks would not...

This car was owned by a very good friend of mine(Jeff). I helped him do quite a bit of work on it, so when it came time to sell, I was there. This car has won many a show at The Nat's and Buicks @ Bristol. Some may think it's over the top, but it ALWAYS draws a crowd. I hope to get it back out...

I have a TTA rearend complete with good brakes,approximately 43,000 miles. Performed fine when removed. $350.00 OBO.Located in Florida

Need opinions on what radiator to select, will be installing front mount and will be driving in sticky Florida heat. Dual fan set-up from Ramchargers to also be used. TIA

I have a street rod project in the planning a 1935 Cevvy(Old Buicks are hard to find). I originally wanted to install a 3.8 turbo drive train, but was wondering about a supercharged engine instead. I really have not studied the situation very carefully, are there problems with this( intake...