Recent content by bwallace

  1. B

    Re: 36lb injectors

    I have a TA-49 Turbo...how much for the injectors?
  2. B

    Re: 36lb injectors

    Been a while since I have worked on the GN and I'm looking for a place to purchase a new set of 36lb injectors. Any help appreciated. Bill
  3. B

    BIG GIVE AWAY!!! Nov. Contest!

    I'm in
  4. B

    rear brake upgrade

    I used a set of the cheap NAPA shoes, got two sets and they let me return the smaller shoes
  5. B

    What kind of Performance boost with?

    With all that fuel and boost don't forget a the Down Pipe and exhaust.
  6. B

    12.50's possible?

    Have not used a race chip yet, but how many tenth, with a similar setup as ws6formula50 would a race chip net over a thrasher 92 on pump gas. The best I have run on with similar combo is 13.0 @ 103 1.85 60ft and I am leaving on 5lbs of boost, Sunoco 94. I keep my boost set to around 17 due to...
  7. B

    tires rims and backspacing woes

    I'm running 275/60 BFG drag radials on 15x8 3.5 bs Weld Pro Stars with no problems.
  8. B

    Ricers ruin things for everyone!

    I welded a cat heat shield to my test pipe, but here in Maryland they rarely check under the car.
  9. B

    changing out fender

    Didn't need to remove the header, actually there are pins in the Header panel that help lineup the fender. It's pretty straight forward just make sure you keep track of the exact spots the bolts came from they are not all the same size but look alike. I had the fender installed on the first...
  10. B

    changing out fender

    I replaced the passenger side last year...there are 4 or 5 bolts along the upper part of the fender, a couple of bolts on the front core support, 4 or bolts in the fender wells and you will need to remove the bumper filler and unbolt the hood hinges. THe really tough part is getting the fender...
  11. B

    Easy question for everyone here I'm sure...

    Make sure you discharge any static that may have built up in your body. Sound funny but it is more common than you think.
  12. B

    Help with 60' times...

    I agree! No sidewall
  13. B

    How to convert to S-10 wheel cylinders.

    Here is what I have done to the brakes: S-10 cylinders Aluminum Drums (Had them turned with a course surface) NAPA Brake shoes (large shoes) Line Lock
  14. B

    How to convert to S-10 wheel cylinders.

    I was considering one before I did the conversion, but like I said I seem to hold boost just fine. I would probably try it if it would help me hold even more boost. Might be tough finding a place to install the canister. I know they make an electric vacuum pump but it runs around 400.00. Let...
  15. B

    How to convert to S-10 wheel cylinders.

    I guess every car must be different...yes I can lock the rear brakes, but have never had a problem under normal driving conditions even in the rain. Here is a link from a vacuum canister from jegs, this might help. http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=152717&prmenbr=361
Top