After a complete restoration of my 86 that included new doors, the power window switch on the drivers side became intermittent. I replaced the switch, used a bit of dielectric grease in the pin holes and carefully made the connection and reinstalled the blue plastic "hat" on the long pin. Still intermittent. If I push in on the switch body while activating the switch it works every time. Is the solution to squeeze the male and female connectors harder? It does seem they go all the way in. The switch works every time when it is not in the door holder. As soon as I reassemble the door card, problem arises. Afraid someday it will be stuck down and a storm will come up. Suggestions for a sure connection?