ATI dampner internal balancer

[vboosted6]

I'm currently building a stroker motor that's internally balance.I know I can't used the stock one because its an externally balancer.I've use ATI products in the past and been very happy with them.Can the ATI damper be my modified to work.

 

[750H.P.V6]

It's not worth the effort to make it to work. BHJ makes a nice damper which is neutral balanced and configures with the stock pulley, crank sensor etc. Also TA sells a more affordable version which is similar to the stock one except neutral balanced and made from steel. Both the BHJ and TA balancers are SFI approved too.

Neal

 

[RICHIE HIGH PSI]

In the new ati catalog, they have a new balancer for the Buick.

 

[750H.P.V6]

Good to know. I wasn't aware of that.

Neal

 

[tbone87]

It's a nice piece.

Sent from my XT1585 using Tapatalk

 

[RICHIE HIGH PSI]

http://www.atiracing.com/products/dampers/charts/dambuick.htm

It costs less than a BHJ, and it comes with an aluminum pulley.

479 at summit

 

[RICHIE HIGH PSI]

http://www.atiracing.com/products/dampers/charts/dambuick.htm

It costs less than a BHJ, and it comes with an aluminum pulley.

479 at summit

 

[vboosted6]

I just check the link but it doesn't mention if it has provisions to accept the reluctor wheel.

 

[RICHIE HIGH PSI]

I just check the link but it doesn't mention if it has provisions to accept the reluctor wheel.

http://www.summitracing.com/parts/ati-917456

Picture shows it

 

[vboosted6]

I see it now ,on the first link its not shown.thxs for the info.

 

[tbone87]

I will try to get a pic of one installed today if y'all want.

Sent from my XT1585 using Tapatalk

 

[NY Twin Turbo]

Not that it matters to most, but does it have an SFI rating?

I didn't see it on the listing.

 

[Chuck Leeper]

Not that it matters to most, but does it have an SFI rating?

I didn't see it on the listing.

I bumped the image up, and see it has the SFI logo on the face.
Not sure what HP level this will be used on, but the ATI on my LS has a 800HP warning issued...

 

[SS/GN]

This is great , nice to see the aftermarket thinking of a 30 year old hot rod!

 

[jpwalt1987]

I will try to get a pic of one installed today if y'all want.

Sent from my XT1585 using Tapatalk

Did Chris use one on your engine? We decided to switch from the BHJ to the ATI on my engine since the BHJ needs to be repaired.

 

[tbone87]

One on his. Have one ordered for mine

Sent from my XT1585 using Tapatalk

 

[Chris Hogeland]

I have some coming. I worked with ATI on getting these done. I can set the wheel at 10 or 50 degrees for different set ups. I also make A custom timing pointer for them.


Sent from my iPhone using Tapatalk

 

[Chris Hogeland]

Sent from my iPhone using Tapatalk

 

[tbone87]

Pretty ^^^°

Sent from my XT1585 using Tapatalk

 

[jpwalt1987]

Can't wait for mine!!