There seems to be a lot of people logging items that should be logged and they are not. The XFI can log 24 sensors max, if you go higher than 24 the next sensors will not display properly. It does not slow anything down if you log 1 or 24 sensors, like in the classic after 14 sensors the logging rate goes to a crawl. I also see people not logging VE% you must do this , since when you edit the map you wont be able to go back and see what the ve the ecu was using at the present time. Here is a generic list for XFI users, traction control , PA modes, boost control not included. Also always log at 20 fps.
Map (kpa)
rpm
psia
VE%
target a/f
actual a/f
o2 correction
spark btdc
cam sync btdc
error code
error code 2
coolant temp
batt volts
inj duty%
tps
esc rtd
aft.cor
cts.cor
air temp
mph
inj pw
target IAC
learning
I will be adding to this thread later when I have more time.
Map (kpa)
rpm
psia
VE%
target a/f
actual a/f
o2 correction
spark btdc
cam sync btdc
error code
error code 2
coolant temp
batt volts
inj duty%
tps
esc rtd
aft.cor
cts.cor
air temp
mph
inj pw
target IAC
learning
I will be adding to this thread later when I have more time.