I need the following:
Turbo(any suggestions?)
Injectors
Torque Converter
Alky Control
Downpipe
Engine & Frame Mounts
Custom Harness(I have a GN Harness)
ECM(Unless the Firebird's will work)
QUOTE]
Hello.. Fellow F-body guy here
1)You'll want to buy the (engine) mounts from HR Parts. Poly engine mounts.
You can get a set of (Frame) mounts from a local bone yard. Any G body with a 3.8L will work. I might have some here if your intereseted.. I'll look.
2)Turbo should be in the .50-.62 range. Keep your eyes on a used one from the parts for sale section.
3)Look for 2800-3200 stall Make sure it's made for a GN! Meaning it's been behind a GN engine and that's where it stalls: the parts section too.
4) Your GN harness will work fine. You'll need a factory GN ECM!!!!!!
5)Injectors I'd start with a set of 42-50lb/hr Part section stuff too with chip.
6) Alky... I'm not a fan of it but some are... I've put a pump gas F-body in the high 10's with a GN engine no alky. (10.92@123mph) 1.48 60' on pump gas through the mufflers on a DOT.
You've got a great start... good cam and the rest of your setup so far looks great....
Need any help e-mail anytime.
UR50SLO@aol.com
~Scott