Search results

So my drivers side heat shield just decided to fall off. How was this attached as I don’t see any connections points? Thanks.

Anyone use the repo intercooler shroud from Kirbans or GN1? Mine has seen better days. Any feedback would be appreciated.

255/60 MT drag radials

I did a search to find the center to center (PM Pin location to Vacuum Pin location) placement for drilling the PM pedal to use on a vacuum setup but came up with two results, 1" and 1.5". Can someone confirm which is correct, thanks.

Looking for the proper g-body brake pedal to convert over to vacuum brakes. Let me know price shipped to 77901.

Pulled the glove box light and plugged it in and yep it came on when I turned on the headlight switch! Would it be a problem to have that light plugged in all the time? Wouldn't mine a little extra light in the interior. Thanks Paul!

Can someone tell what this plug is that sits right above the console pod, just underneath the radio. Looks as if a light bulb should be in there but not sure. Thanks.

I purchased a kit for the rear and had some issues with the sway bar. Looking at the one they offer now, the contour around the housing of the rear end definitely looks different then what I had purchased. I put the stock one back on with their control arms and never purchased another. I think...

Anyone know where to get or what replace the sump hose with? TIA

Thinking of painting my 86 Dark Blue T a darker shade of blue. Maybe almost borderline black in appearance. Anyone have any pics that may have gone darker from the original dark blue metallic color. Thanks

Do I need to bleed the system to replace the sump hose on the PM unit. Also do the argo parts stores carry this specific hose?

Which filter you guys using right on the end of the LS1 3.5" MAF? I know I'll need a 3-3.5 coupler for my 3" MAF pipe but wasn't sure if there was a way/setup to reuse my existing K&N filter that mounted on the end of the stocker. Thanks

Sent you a PM on the drivers side chrome sidemarker and console parts.

Whitecobra98: With yesterdays ambient temp of 100 F...my coolant temp was between 198-200 F with the A/C on. I have a fairly new factory replacement radiator with a 160 stat. Razor: When the idle stumbled I was able to go thru the scanmaster and BL was at 129 with everything within...

I've noticed several times in stop ang go traffic that as soon as my ATS starts flashing "HOT" on the scanmaster the idle will stumble and then quickly recover. Any ideas as to how the ATS could be causing this or if it's just coincidence and another problem. Living here in south Texas is pretty...

With the HVAC controller set on MAX, should I be getting some air out of the floor vents by the console. I'm getting air through the primary vents as I should, but wasn't sure if some air also came out of the floor vents.

Just installed UMI Tubular Uppers/Boxed Lowers/1" sway bar and rear end housing bushings. Should the sway bar come into contact with the lower tabs on the rear end housing? On the left side there is contact, were as on the right side there is minimal clearance.

Novaderrick The manufacturer, Dorman, that you referred to are the units I was talking about. I just assumed that that were "rebuilt" assemblies. I wonder what brand of components they use on these units.

Has anyone ever used the rebuilt upper control arms for the front end that come complete with new bushings/cross shafts/ball joints? Any issues with fitment and quality? The reason I ask, is I was about to replace the upper bushings and ball joints with MOOG replacments, but a friend of mine...

As newbie to the turbo buick scene, I went with Eric's 60 lb'ers and matching chip combo and couldn't be happier. I considered the 42.5 lb injectors but went ahead and went with the 60's to avoid any addtional need for more latter injector (at the advice of many memebers here)....car cranks...