Wire Harness Question

[jessecool]

For anyone that has successfully swapped a GN drivetrain into a non turbo car. I recently installed a 85 GN drivetrain into a carbed regal. Now i installed the harness for the motor. Now what about the other dual clear plug for the fuse box? Is there anyway to get the motor running without that harness and use the original one from the fuse box? The plugs match up perfectly.

 

[GNVenom]

There is one wire in that connector (C437) that is critical. It's the ECM fused feed, pink with black stripe. You need to run that to a switched fuse. Also, there is a ground wire (black/white stripe) that should be grounded. Other than those, the harness should work.

 

[jessecool]

thats music to my ears..i was not looking forward to ripping out the whole dash to change it. Thanks