Hi,
What size turbos would you recommend? I have 454 with 10.2 compression, block is (4 bolt slayed outer holes,forged crank, forged rods with 7/16 bolts, and forged pistions) alum. heads(intake valves 2.25 exhaust 1.88- 110cc) , cam is .640/.598 lift- 114 degree lobe separation with 1.7 roller rockers. It will be street driven mostly. I want to run a twin turbo at 5-8 lbs of boost. Was thinking no intercooler but using water/alcohol injection if needed. It is fuel injected (has 38 lbs injectors but planning on going with 60lbs), I have dual walbro 340s in the gas tank and I plan on use a FAST setup. I would like to be in the 700-800 hp range. Redline is 6200 rpm and would like boost by 2500 rpm. It's backup up by a 200r4(well built) and 12 bolt rearend(373 gear) . Running 13in wide tire.
Thanks for any suggestions.
Chuck
What size turbos would you recommend? I have 454 with 10.2 compression, block is (4 bolt slayed outer holes,forged crank, forged rods with 7/16 bolts, and forged pistions) alum. heads(intake valves 2.25 exhaust 1.88- 110cc) , cam is .640/.598 lift- 114 degree lobe separation with 1.7 roller rockers. It will be street driven mostly. I want to run a twin turbo at 5-8 lbs of boost. Was thinking no intercooler but using water/alcohol injection if needed. It is fuel injected (has 38 lbs injectors but planning on going with 60lbs), I have dual walbro 340s in the gas tank and I plan on use a FAST setup. I would like to be in the 700-800 hp range. Redline is 6200 rpm and would like boost by 2500 rpm. It's backup up by a 200r4(well built) and 12 bolt rearend(373 gear) . Running 13in wide tire.
Thanks for any suggestions.
Chuck