Various Turbo buick parts

[McClean]

All items from 1987 Grand National:

Block (STD bore) $350
Pistons/rods (2 with skirt damage, rods in good condition) $50
Factory cam/lifters $50
Front balancer $40
Flexplate $40
Timing cover $70
Factory good MAP sensor. $25
ATR Pitbull chip for 009's. $25
Reman MAF worked when pulled. $30
Fender trim for all corners. $25 per piece
Two turbo shields in good condition (one has very small crack). $50
Good working stock fuel pump. $25
Walbro 255 LPH pump (500 miles). $75
50 lb Delphi injectors just rebuilt and flow tested (Chuck Leeper) paperwork included. $175
Factory 87 Lower intake manifold. $40
5 brand new 30 lb Lucas green stripe injectors. $100

Offers will be considered, no ridiculous low baller's please . All prices exclude shipping.
I can provide any photos or specs that are required, just ask.

Thanks,

Brian

 

[Squid4life]

I will take intake. Shipped price to 91913?

 

[howdies86]

All items from 1987 Grand National:

Block (STD bore) $350
Pistons/rods (2 with skirt damage, rods in good condition) $50
Factory cam/lifters $50
Front balancer $40
Flexplate $40
Timing cover $70
Factory good MAP sensor. $25
ATR Pitbull chip for 009's. $25
Reman MAF worked when pulled. $30
Fender trim for all corners. $25 per piece
Two turbo shields in good condition (one has very small crack). $50
Good working stock fuel pump. $25
Walbro 255 LPH pump (500 miles). $75
50 lb Delphi injectors just rebuilt and flow tested (Chuck Leeper) paperwork included. $175
Factory 87 Lower intake manifold. $40
5 brand new 30 lb Lucas green stripe injectors. $100

Offers will be considered, no ridiculous low baller's please . All prices exclude shipping.
I can provide any photos or specs that are required, just ask.

Thanks,

Brian

Please send pic of rr fender trim piece to mrgees@live. com or 260-726-5214. I'm interested based on condition. Thanks, Howard.

 

[FLAT BOOSTED]

second on lower intake

 

[McClean]

PM sent to Squid4life. Email sent to Howdies86.

 

[McClean]

Photos for Socal200913.

 

[McClean]

BUMP.

More items for sale, i will add them later. Includes factory valve covers and some misc parts.

 

[McClean]

Parts still for sale:

Block (STD bore) $350 - sale pending
Pistons/rods (2 with skirt damage, rods in good condition) $50
Factory cam/lifters $50
Front balancer $40
Flexplate $40
Timing cover $70
Factory good MAP sensor. $25
ATR Pitbull chip for 009's. $25
Reman MAF worked when pulled. $30
Fender trim for all corners. $25 per piece
Two turbo shields in good condition (one has very small crack). $50
Good working stock fuel pump. $25
Walbro 255 LPH pump (500 miles). $75
50 lb Delphi injectors just rebuilt and flow tested (Chuck Leeper) paperwork included. $175
Factory 87 Lower intake manifold. - SOLD
5 brand new 30 lb Lucas green stripe injectors. $100

Also have factory valve covers for sale - $40.

 

[Forrest "Gene" Haney]

Parts still for sale:

Block (STD bore) $350 - sale pending
Pistons/rods (2 with skirt damage, rods in good condition) $50
Factory cam/lifters $50
Front balancer $40
Flexplate $40
Timing cover $70
Factory good MAP sensor. $25
ATR Pitbull chip for 009's. $25
Reman MAF worked when pulled. $30
Fender trim for all corners. $25 per piece
Two turbo shields in good condition (one has very small crack). $50
Good working stock fuel pump. $25
Walbro 255 LPH pump (500 miles). $75
50 lb Delphi injectors just rebuilt and flow tested (Chuck Leeper) paperwork included. $175
Factory 87 Lower intake manifold. - SOLD
5 brand new 30 lb Lucas green stripe injectors. $100

Also have factory valve covers for sale - $40.

 

[Forrest "Gene" Haney]

I"ll take the ATR chip if it's still for sale.
Thanks,Gene

 

[FirstLC2]

Walbro 255 LPH pump (500 miles). $75

why did you take it out soon? Does it comes with installation kit/hardware?

 

[McClean]

Car ran for about 500 miles then spun 2 rod bearings. I am now converting to E-85, so this pump is too small. I thought about keeping it and doing a dual setup but I have since convinced myselft on another route. Pump is still in tank and works perfectly. Tank was cleaned and coated before the pump install.

The pump will come with the sock, rubber mount, wiring adapter, high pressure line, and clamps.

Regards,

Brian

 

[McClean]

Parts still for sale:

Block (STD bore) $350 - still available
Pistons/rods (2 with skirt damage, rods in good condition) $50
Factory cam/lifters $50
Front balancer $40
Flexplate $40
Timing cover $70
Factory valve covers $40
Factory good MAP sensor. $25
ATR Pitbull chip for 009's. $25 - Sale Pending
Reman MAF worked when pulled. $30
Fender trim for all corners. $25 per piece
Two turbo shields (one is cut for aftermarket DP, one has very small crack). $50
Good working stock fuel pump. $25
Walbro 255 LPH pump (500 miles). $75
50 lb Delphi injectors just rebuilt and flow tested (Chuck Leeper) paperwork included. $175
Factory 87 Lower intake manifold. - SOLD
5 brand new 30 lb Lucas green stripe injectors. $100

Please only serious inquiries. Too many people throwing offers then not responding.

 

[McClean]

ATR chip sold.

I'll take offers on the block. Shipping seems to be the issue.

 

[McClean]

Bump. make offers, gotta get rid of this stuff.

 

[turbo57]

what kinda deal can u make me on the lucus injectors.,flexplate and balancer.thanks barry zip is 71047

 

[32getrdy]

pm sent. D

 

[McClean]

turbo57, 32getrdy, pm's have been sent.

new prices . . . . . . .

Block (STD bore) $250
Pistons/rods (2 with skirt damage, rods in good condition) $30
Factory cam/lifters $30
Front balancer $40 - pending sale
Flexplate $40 - pending sale
Timing cover $50
Factory valve covers $35
Factory good MAP sensor. $20
ATR Pitbull chip for 009's. $25 - SOLD
Reman MAF worked when pulled. $25
Fender trim for all corners. $25 per piece
Two turbo shields (one is cut for aftermarket DP, one has very small crack). $40
Good working stock fuel pump. $25
Walbro 255 LPH pump (500 miles). $75 - Pending sale
50 lb Delphi injectors just rebuilt and flow tested (Chuck Leeper) paperwork included. $175 - pending sale
Factory 87 Lower intake manifold. - SOLD
5 brand new 30 lb Lucas green stripe injectors. $100 - pending sale

 

[McClean]

50 lbs injectors, fuel pump, balancer and flexplate are sold.

See below for available parts.

Block (STD bore) $250
Pistons/rods (2 with skirt damage, rods in good condition) $30
Factory cam/lifters $30
Timing cover $50
Factory valve covers $35
Factory good MAP sensor. $20
Reman MAF worked when pulled. $25
Fender trim for all corners. $25 per piece
Two turbo shields (one is cut for aftermarket DP, one has very small crack). $40 or $25 per shield
Good working stock fuel pump. $25
5 brand new 30 lb Lucas green stripe injectors. $100 - pending sale

 

[McClean]

bump