Using an internal gate with T76?

[NJVetteGuy]

I was wondering if anyone has experience running a T76 with an internal gate, I wanted to try it. My turbo has an .85 A/R housing, I know a stock elbow wouldn't work but I was going to try a THDP set up for an internal gate. Would a regular WGA work? Any input, comments or flaming welcome

 

[JoyOf6]

I used to run a 3-bolt LT88 (essentially an LT76 with a different comp wheel; not even close to a PT88) with PTE 0.85 exh housing and stock-style actuator. I didn't have any trouble controlling boost with it at WOT (usually 28-30 psi but sometimes a bit lower; it ran 9.5s at the time). That's all I can address regarding function of the set-up.

Art