Turbo Regal Limited

[Apro4x4]

Can a manual 60/40 split bench be converted into a power bench?

Are parts still available for this conversion?

 

[jdub]

seat

I've done it by buying a driver side power seat. I got mine from a vender TTA Owner. You can just buy the track and bolt it to your present seat.Then you need to do is cut out for the seat switch and run the wires through the bottom of the seat. I just didn't have the time or patient for that I was recovering the seats anyway so I just bought the whole seat it was easier for me. All you have to do is run the wires if you get the whole harness it plugs up to the upper left of your fuse block. Good luck with your project.

 

[Apro4x4]

So all I need is the power seat bracketry (and switch assembly)?

 

[jdub]

yes

Yes if you can find a power seat track assembly. They are really expensive if you find a used operable unit.

 

[Apro4x4]

Thanks for the scoop!