turbobose13
New Member
- Joined
- Nov 18, 2004
what is the line pressure supposed too be, in the 2004r tranny.
bose
bose
transmission line pressure
- Thread starter turbobose13
- Start date
WE4
TBcom Admin /Prayers NYFD/NYPD
- Joined
- May 24, 2001
Well...
Depends on your application, but generally it should be at no tv in park about 65-90 psi In HP units or real fast cars it can be bumped up to 125 or so. With TV or full tv it should be 240 or better.
Basically it should be
no tv 1/2 tv full tv
P 65-90 125-200 230-270
R 100-135 135-210 230-270
N 65-90 125-200 230-270
OD 65-90 125-200 230-270
D 65-90 125-200 230-270
2 100-150 150-200 230.270
1 100-150 150-200 230-270
Now we run a little higher which I believe in more like at full tv 290-310 & as high as 325, but that is PTS.
With the Billet pumps we are able to do this without fear of pump breakage or failure.
Just our opinion ......But it WORKS!
Bruce
WE4
www.PTSXTREME.com
Depends on your application, but generally it should be at no tv in park about 65-90 psi In HP units or real fast cars it can be bumped up to 125 or so. With TV or full tv it should be 240 or better.
Basically it should be
no tv 1/2 tv full tv
P 65-90 125-200 230-270
R 100-135 135-210 230-270
N 65-90 125-200 230-270
OD 65-90 125-200 230-270
D 65-90 125-200 230-270
2 100-150 150-200 230.270
1 100-150 150-200 230-270
Now we run a little higher which I believe in more like at full tv 290-310 & as high as 325, but that is PTS.
With the Billet pumps we are able to do this without fear of pump breakage or failure.
Just our opinion ......But it WORKS!
Bruce
WE4
www.PTSXTREME.com
Similar threads
