greeneyegi
Well-Known Member
- Joined
- Feb 21, 2010
ive finally gotten rid of 99% of my little gremlins here and their.
new wiring harness,aem map 3.5,tr-6,sd2 chip,alky,powerlogger,on and on.
so my latest issue was only happening during startup.it would usually do it only after warmed up.
now more and more,once after it was already running.
it floods,then seems like it runs on 3 cylinders.
so today I started it and it started perfectly.i shut it off,then I pulled 3 wires off.one on each of the sets of towers on the coil.i then started it with just 3 plugs firing and it is exactly whats happening.last night at the tracks it flooded but after trying to start it for 3 min it finally ran fine.
any ideas,where to start?
bob?
new wiring harness,aem map 3.5,tr-6,sd2 chip,alky,powerlogger,on and on.
so my latest issue was only happening during startup.it would usually do it only after warmed up.
now more and more,once after it was already running.
it floods,then seems like it runs on 3 cylinders.
so today I started it and it started perfectly.i shut it off,then I pulled 3 wires off.one on each of the sets of towers on the coil.i then started it with just 3 plugs firing and it is exactly whats happening.last night at the tracks it flooded but after trying to start it for 3 min it finally ran fine.
any ideas,where to start?
bob?