I have started my custom air ram pickup. Time to try out the new tig welder.
Made the template from thin cardboard type material. I will transfer this to sheet metal and start cutting.
Thanks Charlie. I thought about putting it here after I had already posted. I'm going to make one out of steel and on out of aluminum. I got the Eastwood Tig welder. My aluminum welds look better than my steel. Go figure. I have noticed that the fast guys have been using ram air. This could be argued for days. I have had the filter under the hood and under the bumper. When I went to MAFless the turbo sounded insane when the throttle body was snapped shut. Loved it. I won't be using a filter but I drive very little on the street and never in the rain so I'm not concerned about picking up any materials that will go through the turbo. On the track at high speeds I feel sure that air is being forced toward the turbo with the ram air pickup.
Thanks for the info on the welder. I saw in Car Craft where they are selling their TIG machine and Plasma Cutter for like $999 for both. That is about $500- $600 off their reg price. I have been needing to replace my old Craftsman MIG.