TA49 and lots of other stuff for sale!

turbobob924

Member
Joined
May 28, 2001
Cleaning out my stash of spare parts and need $$$ for more upgrades!

:biggrin:
I just upgraded my turbo so I am selling my TA-49, which was originally from Precision, it has the .63 exhaust housing. I bought it slightly used and I put less than 20 track passes on it. I made something like 560ft lbs on the dyno with it and the 42.5 injectors. THis things spools very fast! It is in awsome shape. I paid $500 for it last year and would like to get $425 shipped. This includes the adjustable actuator and polished inlet bell. I will through in the ATR boost controller (also for sale below) if purchased for $425!

:redface:
42.5 Lucas P/N 621031, green stripe, for sale They need need o-rings but S/B OK for use. $155 Shipped in USA. I will include a basic chip programmed for them.


:rolleyes:
Caspers Electronics 8 position Ultrachip Version 3 $125 shipped
Chip programmed for 86/87 Regal with above 42 lb injectors.
Chip programmed as follows:
Pos-0- Antitheft
Pos-1- 12 PSI, 20 deg WOT timing, full emissions
Pos-2- 16 PSI, 22 deg WOTtiming, street 93 octane and no alchy
Pos-3- 18 PSI, 18 deg WOT timing, alcohol
Pos-4- 19 PSI, 20 deg WOT timing, alcohol
Pos-5- 20 PSI, 22 deg WOT timing, alcohol
Pos-6- 20 PSI, 24 deg WOT timing, race 99 or higher octane and no alchy
Pos-7- 20+ PSI, 26 deg WOT timing, race 113 or higher octane and no alchy

Chip is in excellent condition, no damage to wires or connectors.
See thier website for more details:
capsers website

:cool:
Set of 40# "red strip" injectors. Number is 621030 $60 shipped. No chip

:D
MAF Translator not the plus version - $75 shipped
Good shape and only used for 1 year.
These sell for $179 new!
see full throttle speeds website for details:
translator information

:tongue:
ATR manual adjustable boost valve. It replaces the wastegate solinoid so you can manually adjust boost- $25 shipped

I will send pictures to interested parties and will consider any "bundle deals"
Paypal or money order only!

I will try to answer questions as best I can.
 
re translator

I used it with a 3" MAF. It can be used with several ones up to 85MM

And this one is version 5.

I also have a 85MM MAF that I might be able to part with for another $60.

Thanks for shopping!
 
I have a street version Turbo tweek chip presently,will this translator require an extender chip?or can I still use the TT chip?
 
I run a translator with a TT chip, I have a version 5 somebody sold me I am using with a 3" LT 1 mass air flow sensor and # 30 greenstripe injectors. I am going to be installing the mototron 60/65 injectors and was told the version 5 translator chip would have to be updated for a version 6 chip or better because the extreme extender chip would not work with the version 5 translator. I think you only have to update the translator chip if you are going to use injectors bigger than the 50's.
 
The translator will work with your chip. Your chip just will not be able to see more than 255GS thru the MAF. That is what the translator is for.
 
Here are some pictures
 

Attachments

  • IMG_0059.JPG
    IMG_0059.JPG
    41.4 KB · Views: 109
  • IMG_0060.JPG
    IMG_0060.JPG
    48.8 KB · Views: 98
  • IMG_0061.JPG
    IMG_0061.JPG
    52.3 KB · Views: 92
  • IMG_0062.JPG
    IMG_0062.JPG
    39.1 KB · Views: 88
There is a pending local sale of the turbo and the 42.5 injectors.

The 40# injectors are still available
 
I'll definitely take the turbo and boost valve if your local sale falls through. Please PM me if it does.

Thanks,
Mark
 
Thanks everyone!

Thanks everyon for your interest and good questions.

Everything but the 40# injectors have been sold.

Let me know if there is interest in them!'
 
Top