Stage 2 parts 4 sale

[Lunkan]

The Swede and I have come to the conclusion that we do not have the time, and the least the money. The project has been sitting for a couple of years now, and Ulf has decided to sell the chassie.

As I no longer live in the same town, I don´t remember everything there is. I´ll update with more info and pictures later.

To sum it up i little
* 2 sets of #153 engine block
* 2 sets of heads
* 3 intakes
* 3 different oilpans
* LOADS of valvesprings
* a couple of sets of rockers
* 2 different oilpumps
* a couple of sets of valve covers
* honing plates
* Milodon gear drive
* 2 timing covers
* Meziere unused electric waterpump
* 2 sets of rev kit
* Unused Wilson Manifolds elbow and throttlebody
* lots and lots of more stuff...

Please check http://gallery.stb-racing.com for pictures

Alot of parts was bought from John Mason:
http://www.turbobuick.com/forums/stage-ii-tech/215648-stage-2-blow-out-sale.html

The price is BEST OFFER and will include shipping from Sweden to the closest port, of my choice, near Your location.

 

[49-blues]

Interested in the wilsons throttlebody and plenum. PM me a price, What pistons with specs,cams and cranks do you have?

 

[odell4o8]

parts

do you have a price on the electric water pump, blocks, heads, ?

 

[GNBRETT]

I'll take the Meziere elect waterpump. You take paypal? What do you have for heads?

 

[Lunkan]

Hi all,

Thanks for Your PM´s and I know there are lots of interests in single parts. One of our biggest "problems" in this is shipping, to ship outside Sweden (especially US) is INSANE. My hope is to get a reasonable price for the hole package and ship everything at the same time.

And what´s a reasonable offer? $7000 including shipping to a eastcost port?

I´ll try to get some pictures during the weekend of the whole package, including closeups.

Regards from SWEDEN
//Andreas

 

[Lunkan]

Ok, I´ve updated the gallery with more pictures. As I can´t edit my first post, here´s what I´ve got for sale.
Blocks:
* Stage 2 block, #153
* Stage 2 block, #153 (was holed, repaired and welded but needs one sleeve)

Heads:
* One set of 199592 aluminum heads, bare. (welded, needs machining)
* One set of aluminum heads, complete. Ported by Jim Bell at East Texas Race Cars (2.125 intakes, 1.625 exhausts, flow 325/285 CFM, titanium valves, retainers, Erson E9150048P electroplated triple springs, Jesel 1.7 rocker set-up with tool steel adjusters)

Cranks, balancer, flexplate:
* BMS evenfire crank, machined for CSB rods (needs #1 journal turned).
* BMS evenfire crank
* ATI superdamper
* unknown damper
* JW flexplate, SFI approved

Camshafts, lifters, pushrods, rockers & springs:
* Comp evenfire roller cam, .460 lobe lift
* LSM oddfire big journal roller cam
* 12 Comp roller lifters
* 10 Isky roller lifters
* 6 unknown roller lifters
* 6 unknown roller rockers, stamped 1.55
* 6 unknown roller rockers, stamped 1.6
* 6 unknown roller rockers
* complete revkit
* BUNCH of pushrods
* LOADS of springs

Intakes:
* Ultra trick sheet metal intake manifold by Jim Bell (2 tops, one for 4150 Holley the other for a Dominator)
* BMS intake manifold silver powdercoated
* BMS intake manifold

Valvecovers:
* 1 pair BMS cast aluminum valve covers, silver powdercoated
* 1 pair Moroso sheet metal valve covers
* 1 pair BMS cast aluminum valve covers

Oilpumps:
* One 1-stage Weaver Brothers external
* One 3-stage Weaver Brothers external
* LOTS of Weaver Brothers spares
* Weaver Brothers repair manual

Oilpans:
* 4 different including one "high dollar" Stefs pan and another sheet metal pan

Timingcover and waterpump:
* BMS aluminum timing cover
* Unknown timing cover
* Meziere electric waterpump, UNUSED
* Stock type mechanical waterpump

Pistons and rods:
* 5 MGP aluminum rods 6.230 long
* 6 unknown rods (could be Carillo). One is cracked
* 6 CP 4013R pistons
* 3 BME 66 pistons
* 7 unknown pistons

Misc:
* 4 different MSD distributors (one #8552, one labled "Buick V6 EVEN-FIRE", one #?475)
* BHJ honing plate
* header adapter plates
* Milodon gear drive
* Bunch of gaskets
* Drive belts

 

[Lunkan]

So, what would be a reasonable offer as a package sale?

 

[Lunkan]

ttt

 

[Lunkan]

The parts needs to go

$4800 and it´s Yours. This will include shipping (which costs me $1300). Here´s a 15.5MB zip-file with all pictures of the parts
http://stb-racing.com/4sale/stage2.zip

I´m sorry that I can´t devide the parts for You guys.

 

[Lunkan]

Stuff is up on ebay eBay Motors: Loads of Buick stage 2 parts (item 180291465564 end time Sep-30-08 08:55:49 PDT)

 

[Quint]

the intakes look good. I know you want package, but what type price for intakes

 

[200MPHClub]

Am I missing something....wouldn't anybody interested in building a SII motor be all over this for 4800 including shipping? I'm just trying to figure out why no one is touching this....heck even to bring it here and then part everything out and make money on the deal.

 

[Lunkan]

the intakes look good. I know you want package, but what type price for intakes

Thanks for the interest of the intakes. But as You understand, the shipping will not give me anything over to ship single parts. In that case I would get more selling the stuff to a junkyard by weight

Am I missing something....wouldn't anybody interested in building a SII motor be all over this for 4800 including shipping? I'm just trying to figure out why no one is touching this....heck even to bring it here and then part everything out and make money on the deal.

I´m not getting it either, maybe because I´m Swedish

 

[Lunkan]

Stuff is going to Australia $4500 shipped.