with getting the new car i have decided to sell my stage 2 --- 016 4.1 off center motor that i built for my car and never installed. all parts are 100% brand new. the block was never cut and is now cut to 3.965 bore. new parts are---3.625 crower crank, crower 6.300 rods, crower push rods, j e pistons, bhj balancer, rjc oil pan, billet 232/232 580 lift cam, crane solid lifter's TA head's with 1.94 intake valves, t+d 1.65 shaft rockers, arp stud's, 160 lbs.injector's.-----again---all these parts are 100% brand new, never run------------------------------------------------
part's that are not new-----but are 100% perfect
CAS sheet metal intake, JW flywheel, duttwiller external oil pump, headers, f.a.s.t sequential unit with o2.
the motor was assembled by neil steward but i have not installed the oil pick up into the pan or run the steel braided line's for the oil pump. i have the pick up, ton's of AN fitting's and some line.
i am not looking to part this out. please dont ask.
$15,000 Len 702 434 2991
part's that are not new-----but are 100% perfect
CAS sheet metal intake, JW flywheel, duttwiller external oil pump, headers, f.a.s.t sequential unit with o2.
the motor was assembled by neil steward but i have not installed the oil pick up into the pan or run the steel braided line's for the oil pump. i have the pick up, ton's of AN fitting's and some line.
i am not looking to part this out. please dont ask.
$15,000 Len 702 434 2991