SMC kit pumping flat out?

[AnArKey]

Anyone know what the flow rate of a SMC kit is when completely cranked?

 

[BLACK6PACK]

I don't know, but that is where my dial is pointing - 10. I'm running 24psi in 1 & 2 and have it dialed down to 22-23 in 3rd. Sig is old. I have pte 54, 55s and a 3500 nl. Most knock I've seen is 1.6 degrees. Gotta love it!

 

[Mr URL]

Don't have exact numbers. I'm running a dual nozzle kit with 2 10 nozzles and controller set on max. Coming on at 12 psi with 24 psi through all gears on 91 octane, 22 degree chip, and 100% denatured alchy.

I can get about 4 zero to 120 mph runs before the low alchy light comes on at 1/3 tank left.