Routing New cooling lines.

[bishir]

I'm replacing the factory hard lines since mine were damaged during a motor pull. After buying all the hose and fittings I forget exactly how the factory lines were routed and I notice it's a pretty tight fit considering the downpipe, crossover, and headers leave virtually no room. Any ideas on routing solutions for the cooling lines?

 

[Boost231]

I run the lines back to the trans cross member then through the frame on the passenger side and up. Worked great for me.

Posted from the TurboBuick.Com mobile app

 

[bishir]

That's what I may do. Since i have have coil overs there is a ton of room in the frame rail and the spring pocket . Thanks!

 

[psycho6cyl]

Having the spring pocket open kind of scared me. Was afraid lines might move etc. I'm at the same point in my build and don't know where to mount trans cooler and how to run lines. Def looking fwd to pics when you decide how you're going to do it. Are you using factory cooler?