Rjc Boost Controller Help

[fastblackcar]

I just installed an rjc bc and alky at the same time, i installed as per direction with some tension on the rod, i only get 20# and would like a little more, what do i adjust to get afew more #...Thanx...Tom

 

[turbo john FL]

hey tom
you have to loosen the lock nut on the one end and you just turn the end in to create more pressure on the spring. then just re tighten the lock nut to hold it in place ( i should say snug it inplace ) its all brass so dont tighten too much :biggrin: the more tension you put on the spring the more booost you will build

hope this helps