regal hybrid using original GN fuel return line question

[dsmith4994]

i have a 1986 regal i am putting a gn 3.8 turbo engine in.
Its actually in and the only thing left is the return line hookup.
Does anyone know the thread size and type on the return line at the frame for the original gn engine fuel return line
for the part of the line that goes from the fuel rail to the frame
i am trying to tie into the original v6 n/a return line that is already there
A part number and brand would be a great big help
I did not see anything published in the hybrid section
thanks.......Dave

 

[Schmith]

Larry's Electric in Ruma, IL might have stainless hard lines you could use if you have line bender. but he won't have stock (OEM) bolt in fuel lines. 1-618-282-2852 ask for Larry tell him JAKE sent you. Its around $3+ a foot but it would out last the car and all of us.

 

[dsmith4994]

ideally i need a saginaw end on one side and a barbed 5/16" end on the other
might be pro products part #52183 but they dont show a saginaw end and where do they sell these other than ebay/summit?

 

[dsmith4994]

ttaowner / James hooked me up with a brand new stainless return line with the correct fitting that i needed like yesterday. It turns out to be a saginaw fitting with a fine thread and an O-ring. No local parts store carry this
THANKS JAMES / ttaowner ......... TTT