Plx wideband ?

[TurboSpeed]

Ok i know iv seen on here somewhere that mentions the best location for the wb sensor but i cant find it anywhere. I thought it was down low on the dp, but i see the ta dp and its got the bung at the top. Maybe thats for a egt gauge? Need a dp and just checking before i buy one.Thanks

 

[Sweet6]

Most people put the bung just after the bend in the downpipe. Say 12inches from turbo or so. I had one down just before the dump and it did not reada correct when I had the dmp open. I put a bung just around the bend of the DP and it has been fine.

 

[TurboSpeed]

Ok Thanks alot for the info. So is the Ta Dp a good choice? Ive heard good stuff about RJC dp but it has no bung.

 

[Sweet6]

Ok Thanks alot for the info. So is the Ta Dp a good choice? Ive heard good stuff about RJC dp but it has no bung.

The TA one is good.

 

[TR Custom Parts]

PLX instructions say to mount the bung at least 24" from the turbo.

 

[TurboSpeed]

Ok thanks for the help.

 

[NicksTurbo6]

Ok Thanks alot for the info. So is the Ta Dp a good choice? Ive heard good stuff about RJC dp but it has no bung.

When I ordered my DP from RJC, I had him weld a bung in it for a wideband 02. All you have to do is ask



Nick