Oil leaking at sender

[Ken Cunningham]

Years ago I put together a 'T' out of brass parts to plumb in a new oil pressure gauge to the front cover where the idiot light goes. It leaks so bad now that I gotta go back in to fix it. A real PITA.

I used teflon tape the first time, is there a better way to seal this for good?

 

[Mad_Trbo]

If you use a liberal amount of tape you shouldn't have an issue unless you are continuously taking it on and off!

Otherwise if you could get it on after this, you might be able to braze it sealed. Just a thought - good luck!