HotAir6 v.2.0
Uncool Misfit
- Joined
- Sep 8, 2013
I'm upgrading my Hot Air car and would like to install an oil cooler. We need an adapter.
Oil cooler adapter
- Thread starter HotAir6 v.2.0
- Start date
HotAir6 v.2.0
Uncool Misfit
- Joined
- Sep 8, 2013
It looks like you've got what i need. I see some old hoses (I'll get new ones unless those are cheap and clean), I see the oil filter fitting ad well. How much for the two adapter parts?
Do I also see a electric seat drive joint (little yellow thing) and a valve cover filler neck? How snug does your valve cover neck fit? Does it have the rubber gasket and if so what condition is it in?
What about the electric seat drive joint? Who made it (is it New Old Stock or a reproduction)?
Do I also see a electric seat drive joint (little yellow thing) and a valve cover filler neck? How snug does your valve cover neck fit? Does it have the rubber gasket and if so what condition is it in?
What about the electric seat drive joint? Who made it (is it New Old Stock or a reproduction)?
Last edited:
Adapter pieces $40 hoses are decent for 30 yrs. old $10 if you want them (might be useful to get new ones made if using GN radiator w/oil cooler fittings) I also have the radiator if interested. The seat motor part is off an 87 that I use for parts so I assume it is GM? $15 All prices plus shipping! Sorry the filler neck was sold.
Let me know on this stuff and anything else you may need, I might have it?
Let me know on this stuff and anything else you may need, I might have it?
