J jay dcpt Active Member Joined Feb 8, 2010 Oct 10, 2019 #1 Correct me if I'm wrong but when installing a off center rod either stock 2 dot or aftermarket forged piece. The bearing thangs face the pan rail and the offset of the rod will always be facing the counterweight of the crankshaft. Is this correct?
Correct me if I'm wrong but when installing a off center rod either stock 2 dot or aftermarket forged piece. The bearing thangs face the pan rail and the offset of the rod will always be facing the counterweight of the crankshaft. Is this correct?
turbo nasty Turbo Dojo / MNTR Joined Jul 19, 2001 Oct 11, 2019 #2 The offset on the big end of the rod faces the counterweight