New Rebuilt TE-67,Ceramic powder coated TH-DP, New RJC PUCK

[sscamino]

New Rebuilt by Limit Engineering TE-67mm .63 P.T.E. P-Trim with HD actuator still in plastic bag and box from Limit $650.00 plus shipping,Ceramic Powder coated STEEL 3in. THDP with o2 bung, has the normal tiny dimples on the under side that cant be seen. Fits real well 350.00 SOLD,RJC large Puck 40.00 , 2- 275/60/15 MT ET Radials on 8x15 Tork Trust ll aluminum rims off my street car,one tire is little newer than other 700.00 for rims and tires .Also have 86-87 V-6 Full Balanced Bottom End,forged pistons 40 over ,reconditioned rods with ARP,crank is 10 under (somthing went through bearings) Machine shop said 10ths will fix it up,comes with the flywheel very low miles 500.00. Also 86-87 heads cast # 25518445 preasure tested,regular valve job,new soft plugs and seals,resurfaced.007",new comp cam springs and with new ARP head bolts Sell or trade. Looking for boost controler, AMS 1000,new headers,Fast setup, set of MT 295/55/15 e-mail rbart1@verizon.net or 724-561-4470

 

[QWKRNU1009]

sent email

 

[QUIP'6']

Bump

 

[kevinw25645]

any un seen dents in down pipe is it a real terry houston how much shipped to PA 16335

 

[sscamino]

It has a small dipple or two on the under side from taking it on and off, cant be seen when installed. To the best of my knowledge TH- DPwere steel.

 

[QUIP'6']

 

[QUIP'6']

wheels

 

[highboostgn]

still have dp?

 

[incharge]

pm sent