Need wastgate actuator for 63-1 turbo

[OneQuikSix]

Hello all,

I just received my TE-63-1 turbo yesterday and need to locate a wastegate actuator for it. I bought the turbo used and it did not come with a stock-style actuator. Apparently, the modified stock one that came with my TE-60 will not fit; the bolt spacing on the compressor cover is different. Anyone know where I can order one? Here are the specs.

Compressor cover is 4"in/3"out
Exhaust housing is Precision A/R 0.85

 

[RUQWKNF]

FWIW, we need to know exactly what compressor cover your turbo has.
Over the years, that model turbo has had 3 different covers.
Is it the older H cover without the Precision logo, or the newer cover with the Precision logo?
Got any pictures by chance?


Patrick

 

[OneQuikSix]

FWIW, we need to know exactly what compressor cover your turbo has.
Over the years, that model turbo has had 3 different covers.
Is it the older H cover without the Precision logo, or the newer cover with the Precision logo?
Got any pictures by chance?

As a matter of fact, it's the one pictured in this post here
http://www.turbobuick.com/forums/parts-sale/296634-fast-trans-more.html

It's got a 4" inlet and 3" outlet. It also has the smaller 10mm bolts securing the compressor housing. Hopefully that helps. Thanks for your reply.

 

[RUQWKNF]

That's the older style H cover.
We sell actuators with the correct bracket welded up for both the older and the new style H covers. We are also currently running a sale on actuators through the end of Sept.
You just need to specify that you have an H cover when you place your order.
HTH

Patrick

 

[OneQuikSix]

Thanks for your help. I'll be calling you guys this afternoon.

 

[fast86gn]

I think I'm bringing this thread back from the dead? But I have this same turbo 63-1 and need a wastegate that fits. Old style no logo