Need Rotors Machined

[DavidM]

I have old stock rotors that need to be machined in to hubs to be used in the LS1 conversion.

Anyone care to help me out/point me in the right direction? PM me.

I know FlyNBye sells the hubs but would rather have these rotors machined.

 

[DavidM]

Bump! Have the LS1 Bracket coming in the mail later this week. All I need now is the hubs. Will be visiting a local machine shop today.

 

[Meg's Dad]

Uh, did you ask JimmyMack, you khaki pants wearing knucklehead!

 

[Instro84]

i had a shop with a lathe do mine. i've seen a few people cut the brake surface away themself.

 

[DavidM]

Uh, did you ask JimmyMack, you khaki pants wearing knucklehead!

Leave my OD Green/Olive Drab Khakis alone!
And yes! Jimmy recommended 2 Machine Shops.
I took them to Auto Machine Shop on Winslow st in Fayetteville.
$20 a rotor.

 

[novaderrik]

did you verify that they cut the od of the hub down small enough to fit into the rotor?

 

[DavidM]

did you verify that they cut the od of the hub down small enough to fit into the rotor?

I left one LS1 rotor there with them.