car is 87 GN, car is on E85, 80 lb injectors that were just cleaned and flowed before installing, put car on trailer to bring to the transmission shop, as it was recently just rebuilt and it won't shift into 3rd and 4th, but thats another problem for another day, anyway, drove car onto trailer, get to the trans shop to unload and car won't start, brought it back home, and started diagnosis, fuel pressure is fine, has spark, has power to injectors (don't have a noid light to check fire of them but i do have voltage to injectors using a test light), i changed crank sensor but nothing changed, sparkplugs are new and look fine, car doesn't even try to start, just turns over.
no codes via the scanmaster. not sure what else to do. i was going to recheck the cam sensor, would that cause a no start condition if it was bad? and how do i even determine if it is bad? I'm so frustrated and not sure what else to do!!
Thanks
Brandon
no codes via the scanmaster. not sure what else to do. i was going to recheck the cam sensor, would that cause a no start condition if it was bad? and how do i even determine if it is bad? I'm so frustrated and not sure what else to do!!
Thanks
Brandon