Need 2 Carrillo H-Beam Connecting Rods

[Ken Adams]

I need 2 used Carrillo off-center H-beam, narrow connecting rods, 6.380" center to center. Either 927" or 940" pin size acceptable.

 

[drturbo69]

got six new but longer 6.427

 

[Ken Adams]

got six new but longer 6.427

I need 2 used Carrillo off-center H-beam, narrow connecting rods, 6.380" center to center. Either 927" or 940" pin size acceptable.

Thanks but I can't used that c to c

 

[texasmr2]

Just curious but why not just order two new ones from Carrillo? That way you will be guaranteed that you get the correct CC and pin size. Used parts are "hit or miss" and you will at least get a warranty from the manufacturer that is seldom offered 2nd hand.

Just asking, not judging and good luck.

 

[tsm3089]

I have 6. I have about 250.00 into them.

 

[tsm3089]

used. They are also ground on the cam side.

 

[tsm3089]

h.d. not dual pass.

 

[Ken Adams]

I have 6. I have about 250.00 into them.

Would you verify specs for me please?
What would you need for the rods and shipping? My zip is 65018

 

[tsm3089]

6.380. Will double check that tonight. Narrow off center. .927 pin. 250.00 shipped for the 6 if that works for you.

 

[Ken Adams]

6.380. Will double check that tonight. Narrow off center. .927 pin. 250.00 shipped for the 6 if that works for you.

If you would please. Thanks

 

[tsm3089]

No problem. The box they were in said 6.380. Just want to make sure.

 

[tsm3089]

best i can come up with.

 

[tsm3089]

*