Turbo Loyd
Member
- Joined
- May 26, 2001
With the FAST Classic box, I miss the ability to open the A/C compressor clutch circuit and/or open the circuit for the solenoid that controls torque converter lock-up, automatically when stepping on the gas.
I recently ran across this "Smart Switch" from MSD that can be set to use a specific TPS or MAP sensor voltage to switch open a relay with either a 12 volt output or closing a ground. Here is a link to the MSD site for this product:
MSD Smart Switch, PN 8966
Here is a link to download the instructions as a PDF file:
MSD 8966 Instruction link You may have to type 8966 in the search line
Anybody have any experience with this switch and/or have recommendations for settings.
I recently ran across this "Smart Switch" from MSD that can be set to use a specific TPS or MAP sensor voltage to switch open a relay with either a 12 volt output or closing a ground. Here is a link to the MSD site for this product:
MSD Smart Switch, PN 8966
Here is a link to download the instructions as a PDF file:
MSD 8966 Instruction link You may have to type 8966 in the search line
Anybody have any experience with this switch and/or have recommendations for settings.