Magnaflow mufflers, ATR test/dump pipe

[T Spool]

Pair of lightly used Magnaflow mufflers part# 11216. These are 2.5" stainless steel center in and center out. They are a direct replacement for the ATR Pitbull mufflers. Here's a link from Summit MagnaFlow 11216 - MagnaFlow Performance Mufflers - summitracing.com $120 shipped

ATR stainless steel 3" test/dump pipe in excellent condition $80 shipped

I accept PayPal at mikelaforest@comcast.net Shipping free to the lower 48 only.

 

[turbo87regal]

Please put me first in line for the mufflers. sending you a pm

 

[87GNATIONAL]

ATR stainless steel 3" test/dump pipe

Hey t spool im interested in the dump pipe I was just wondering if it will fit a terry houston downpipe? Thanks Dennis

 

[T Spool]

Hey t spool im interested in the dump pipe I was just wondering if it will fit a terry houston downpipe? Thanks Dennis

THDP's need about a 12.5" test pipe. The ATR test pipes are about 14.5".

 

[87LtdT]

#2 in line for the mufflers please and an info request.

Does "Direct replacement" = same length ??

Thanks, Bob

 

[87GNATIONAL]

$$$

Payment sent

 

[DCVING 6]

Mike,
I will take the test pipe if it has not sold yet. Let me know.

Glen
dcving6@aol.com

 

[49-blues]

do you still have these?

 

[T Spool]

ATR dump pipe is SOLD

turbo87regal is 1st for mufflers (awaiting his reply from PM)

87LtdT, there has been .5" cut off of one end of the pipes to make them the same lenghth as the Pitbull mufflers. case lenghth is the same 14", one pipe is 3" on each muffler and one is 2.5" on each muffler. Mufflers are reversible.

 

[T Spool]

Dump pipe SOLD

Magnaflows SOLD

Both shipping tomorrow UPS with tracking#. Thanks

 

[87LtdT]

"87LtdT, there has been .5" cut off of one end of the pipes to make them the same length as the Pitbull mufflers. case length is the same 14", one pipe is 3" on each muffler and one is 2.5" on each muffler. Mufflers are reversible."

Thanks for taking the time for such a good answer.

Bob

 

[T Spool]

"87LtdT, there has been .5" cut off of one end of the pipes to make them the same length as the Pitbull mufflers. case length is the same 14", one pipe is 3" on each muffler and one is 2.5" on each muffler. Mufflers are reversible."

Thanks for taking the time for such a good answer.

Bob

Sure If memory serves me correctly the Pitbulls are 2 3/4" on each end which gives the same length as 3" + 2.5".