Going at 7:00 am tomorrow morning to take my CDL test.Should be back to work in a week or so.I can start working on my project again.I did play with it a couple of times when i had nothing better to do.Got all the intercooler piping done except i need one 90' coupler.So i'll start off with what i have to refreshen evryone.A 1976 Cosworth Vega with an 87 GN motor.An aftermarket FMI (24x12x3) with 3 in inlet and outlet.Running 2 1/2 in tubing from turbo to ic and 3 in from ic to manifold.I'm going to build a 3 inch downpipe.The motor is stock other than a mild port job on the stock turbo.
Now for some questions,I'm going to run a bosch 286 inliune pump and want to know should i just plumb it in 1/2in or stay with 3/8.I want to run as much boost as the stock turbo will allow (22-24 psi).Will 2 3/4 inch be large enough piping for the cold air intake?And what lb/hr injectors do i want to go with?
Heres a link with some pictures-------->
http://www.knights-rule.com/cgi/gallery/Fast-Vega
Now for some questions,I'm going to run a bosch 286 inliune pump and want to know should i just plumb it in 1/2in or stay with 3/8.I want to run as much boost as the stock turbo will allow (22-24 psi).Will 2 3/4 inch be large enough piping for the cold air intake?And what lb/hr injectors do i want to go with?
Heres a link with some pictures-------->
http://www.knights-rule.com/cgi/gallery/Fast-Vega