help with egr gasket

[skostur79]

so far unable to track this one down,,, its the gasket from the intake to the egr adapter

http://www.gnttype.org/techarea/images/8485diagrams/emissions.jpg
its number 48 in this pic

any ideas?

 

[SLOW_85]

?

so far unable to track this one down,,, its the gasket from the intake to the egr adapter

http://www.gnttype.org/techarea/images/8485diagrams/emissions.jpg
its number 48 in this pic
any ideas?

I did alot of searching,couldn't find one anywhere.
Did find a part number.
May be for the 87: Gasket, EGR to intake $1.14 25530599
I looked it up at gmpartsdirect.com, wasn't much info about it.
I pulled one off an intake I had and it's similiar to the turbo drain gasket.
It's larger than the turbo drain gasket but looks similiar.
Might contact Eric Fisher, here on the board. ( turbofish38 )
He may be able to give you a part number.

 

[Waco84GN]

egr gasket

I work at Autozone I will do some looking for you today and I will report back this evening. This is probably an exercise in wasting time for me because my store is so screwed up I cant even find valve cover gaskets for a 350. Anyways I'll get back with you.

Jerry Berger

 

[skostur79]

i checked at work and 95% of any parts i need are discontiuned
but this one is not

its a good number but no stock available ,,,,,

so im still looking

i would like to fire up this new motor !!!!

 

[SLOW_85]

Here's a pic I took.
Gasket is still intact.

 

[Waco84GN]

I checked at autozone

I checked at autozone and they show to have the gasket but when I went to look to see if the gasket was the right one it wasnt where it should have been. Man I hate my store. When I looked the gasket up I looked it up under an 84 regal with turbo. The felpro number was

70978 and like I said it showed to be a normal stock item. Im going with the computer on this one as I wanted to check to make sure the gasket was right but couldnt do to an awal gasket.

Good luck

jerry berger

 

[SLOW_85]

70978 is the egr gasket. ( top-egr to chamber )
He needs the egr chamber to intake gasket.

 

[suicide six]

Gasket, EGR to intake $1.14 25530599

 

[SLOW_85]

I did a search on worldparts.com. Shows no GM dealer with one in stock.
If need be I'll work something out with you on my chamber with both good gaskets.

 

[skostur79]

well see what happens worse case i have mine i can use for a
template to cut a new one


thanks for your help