GNX dash with auto meter spedo. What vss do I need?

[m6z]

I've got the GNX dash plate that bent6 was selling and have been gathering the rest of the parts to do the swap. I'm going to be using a auto meter elect. speedo. Where/what vss sensor do I need to keep the cruise control. A part number would be great.

Thanks,
Doug

 

[Instro84]

Call Caspers, they can point you in the right direction.

 

[JRC86GN]

Hi

How are you making your wireing harness? I was thinking of buying a gnx dash plate but I am not sure how to make it all work.

thanks
Jack

 

[Instro84]

i made my own, pretty simple since i do flight test wiring for a living. grab a wring diagram for the harnesses and you should be able to make one yourself.

 

[m6z]

Looking through caspers site I think I have found everything that I need. Are you guys using the vss sender dead end or the feed through? Any reason you cant remove the spedo cable completely and use the dead end?

this is what I'm talking about.

Casper's Electronics, Inc.: VSS VDO Sender Dead End

thanks,
doug

 

[m6z]

102007 VDO Converter Tach Module $32.95
102045 VSS VDO Sender Dead End $81.95
102046 VSS Convertor $81.95

These are the three items I will need right?

 

[Turbo6Tech84]

I'm im the process of doing this right now with my GN. Been having a problem lately getting the signal from the dead end. Let me know how it works out for you.

 

[Brian Mc]

I think you need a second tach amplifier module for the cruise to work.