I have a set of ATR Headers that I am pulling off my Stage II Motor that has seen VERY little running time. I cannot confirm, but I think these headers are one of the last ones made.
These header fit. The clear the stock upper control arm and the cross over need no modification. These headers also allowed a 4" downpipe to work with no problem.
They are true ATR 4 bolt stainless headers. Never been re welded, no cracks.
These are for PRODUCTION style heads.
Individual EGT Bungs have already been welded onto each primary, and a flange for a wastegate is also on the header in the proper location near the turbo flange itself.
The 4 bolt header flange is also tapped for the turbo bolts so installation of turbo is much easier.
I just got the headers back from the ceramic coaters, and they look great.
This is the called the titanium colour and it is rated to 2000*F.
I am including the v band clamps, the stud and nuts for the headers, the slip clamp for the cross over and the bolts for the turbo to the T4 flange.
Price: $1000. These are basically new headers, plus they have EGT bungs welded on, AND ceramic coating. A set of 4 bolt stainless TA's cost $1125 just for comparison sake.
Adrian
These header fit. The clear the stock upper control arm and the cross over need no modification. These headers also allowed a 4" downpipe to work with no problem.
They are true ATR 4 bolt stainless headers. Never been re welded, no cracks.
These are for PRODUCTION style heads.
Individual EGT Bungs have already been welded onto each primary, and a flange for a wastegate is also on the header in the proper location near the turbo flange itself.
The 4 bolt header flange is also tapped for the turbo bolts so installation of turbo is much easier.
I just got the headers back from the ceramic coaters, and they look great.
This is the called the titanium colour and it is rated to 2000*F.
I am including the v band clamps, the stud and nuts for the headers, the slip clamp for the cross over and the bolts for the turbo to the T4 flange.
Price: $1000. These are basically new headers, plus they have EGT bungs welded on, AND ceramic coating. A set of 4 bolt stainless TA's cost $1125 just for comparison sake.
