Front Mount IC ESP

Interested pending pics and condition. How old is it. Is it complete and ready to bolt up? Any damage? Also how is it set up. External or Internal wastegate.

Thanks
 
The previous owner of the car said he put it on a few years ago. I only had the car for a few months. I am putting a stock location back on.

66579_561342014517_57601546_32404046_3814473_n.jpg

33666_561342024497_57601546_32404047_5883455_n.jpg

64870_561342034477_57601546_32404048_7363732_n.jpg

40892_561342044457_57601546_32404049_7285182_n.jpg

66434_561342054437_57601546_32404050_7850581_n.jpg

66916_561342064417_57601546_32404051_8237972_n.jpg

34413_561342074397_57601546_32404052_6104891_n.jpg

66634_561342084377_57601546_32404053_7834459_n.jpg
 
Thanks. Can I ask what happened to the top? In the pics it appears to have a bend in it. Does it come with all the mounting hardware.
 
That's how it came out. I'm not sure how it got there. The bend is on the back side and was not noticeable while in the car. The hardware is just 2 bolts, yes it comes with them. Its a very easy install.
 
I will hold off on this for now. Let me think about it. Good luck with the sale. Thank you
 
That one is setup for the internal wastegate. The turbo outlet comes straight out. External wastegate will work on this one also. The external wastegate setup is angled down at the turbo outlet and will not allow the use of an internal wastegate because you cannot clock the turbo compressor housing down due to the wastegate rod being in the way. Hope this helps...
 
You must log in or register to reply here.

Similar threads

'87 Turbo "T"
Old school front mount
Replies
5
Views
580
Fat Nat
F
captflash
Precision front mount intercooler
Replies
9
Views
2K
V6sleeper
V6sleeper
0-60n4
Bumper mod - more air to front mount
Replies
3
Views
437
chopped39
chopped39
trick86
SOLD - GN1 Front Mount Inter-cooler
Replies
1
Views
813
trick86
trick86
T
Stuttering after warmed up and driving
Replies
7
Views
453
Turbo6BK
T
Top