Found some stock parts with some race parts

[turbobitt]

stock ECM - $25
4 original GM lifters - $10
1 used injector harness - $20
Power stearing and idler pulleys - $5
Starter shield $5
EGR solenoid w/bracket and lines - $25
Alternator bracket supports - $20
Incomplete Gear drive - $10
Replacement alternator w/small drive pulley - $30 - Note - I had this tested at a local autoparts store and they told me that it was charging at a low voltage. It probably needs a voltage regulator or diodes but is in really good shape and good for a core or at least for the pulley. These are easy to get parts for.

All parts + shipping.

 

[turbobitt]

More pictures

 

[turbobitt]

1 more.

 

[davelostmissing]

If thats a xx148 ECM with Calpack I'll take it.
Paypal? 14303

 

[Steve]

Second on the ECM, let me know if it gets to me. Thanks

 

[Buickrat]

I will take the alternator bracket supports.

 

[turbobitt]

If thats a xx148 ECM with Calpack I'll take it.
Paypal? 14303

What is Calpack ? The ECM has the last three digits of 148. There is no chip.

Allan G.

 

[turbobitt]

Second on the ECM, let me know if it gets to me. Thanks

Please send me E-mail to Turbobitt@cox.net so I don't forget. I will check into shipping but don't expect it to be much.

Allan G.

 

[davelostmissing]

What is Calpack ? The ECM has the last three digits of 148. There is no chip.

Allan G.

A smaller chip- the limp home part. Its on the other side of the inspection cover hole, beside the chip we replace

 

[turbobitt]

A smaller chip- the limp home part. Its on the other side of the inspection cover hole, beside the chip we replace

OK, that is there and intact. I'll let you know about shipping tomarow.

 

[davelostmissing]

Thanks. I wouldn't normally but I didn't ask about the calpack last time

 

[turbobitt]

Thanks. I wouldn't normally but I didn't ask about the calpack last time

Your PM box is full.

ECM shipping cost will be $10. Please Paypal $35 to
AnnetteRN2001@cox.net

Allan G.

 

[davelostmissing]

Sorry Allan- inbox cleared, Paypal sent!

 

[TurboBob]

What is the part number of the lifters.

I'm not interested personally, but a friend has a few, and combining yours and his might make a complete set.

Bob

 

[turbobitt]

What is the part number of the lifters.

I'm not interested personally, but a friend has a few, and combining yours and his might make a complete set.

Bob

I'll check when I get home.

Edit - Called wife and said numbers on the box are 1#523448, HL-85A
Allan G.

 

[turbobitt]

ECM sold.

Allan G.

 

[norbs]

Who makes the gear drive?

 

[turbobitt]

Who makes the gear drive?

Don't know.

Allan G.

 

[robertmonduy]

Hi how much for the pulleys shipped to 33027

 

[robertmonduy]

Payment sent for pulley