Well the part I'm dreading is putting the door guts back together. I received the car tore apart so I have no clue on how to put everything back on, sucks. Still haven't found a parts Manuel , and even then I'm not sure if it will be detailed enough. I want to start hunting down as much information as I can to ease this stress. I'm thinking of even heading to the Buick dealer to see if they can give me some extreme close up diagrams. Any help from any other members would be greatly appreciated.
door handles and glass help???
- Thread starter shelbyz33
- Start date
HighMileage
Albany,NY
- Joined
- Jul 24, 2010
G-body Parts has a book that tells how to get the door windows in and adjusted perfectly.
HighMileage
Albany,NY
- Joined
- Jul 24, 2010
Here it is right here. This should help:
http://www.gbodyparts.com/product_info.php?products_id=1631&osCsid=9bf562a8c7e960b6bd3c9378ca751a23
http://www.gbodyparts.com/product_info.php?products_id=1631&osCsid=9bf562a8c7e960b6bd3c9378ca751a23
I would suggest going to a local junkyard and look at the door of a regal, monte Carlo, Cutlass or Grand Prix. (they are basically all the same)the orientation of the rods that lock in unlock and open the door can be confusing unless ss you have a good reference. There is a lot of window hardware that needs to be located correctly too.
Are you going to install that door or use it as a reference?
